What precautions should be taken during the use of release agents?

In the rubber and plastic manufacturing industry, when molding and manufacturing plastic products, in order to facilitate demolding, improve efficiency, extend mold life, and make the product surface smooth, size qualified, and reduce waste, it is necessary to use release agents. So what precautions should be taken when using release agents?

1. Before spraying the release agent, the mold should be cleaned thoroughly, and there should be no impurities such as rust, oil stains, carbon particles, and organic matter present, otherwise it will reduce the release effect.

2. The water used for preparing release agents should be pure water (ion exchange water or distilled water), and tap water should not be used.

3. The concentration of release agents dose should not be too high, and the coating should not be too thick.

4. Choose appropriate release agents based on the type of formed polymer to achieve better results.

5. When using, it is necessary to distinguish between external coating type, internal addition type, one-time, multiple, and semi permanent release agents, and different

application processes should be used.

Tassin New Material Technology Xuzhou Co.,Ltd was founded in 2016, The factory is located in Ningjiang Industrial Park, Suining County, Jiangsu Province, and Xuzhou is the central city of Huaihai Economic Zone a national strategic region. It is 35 minutes' drive from Guanyin Airport and 10 minutes' drive from Suining high-speed railway station to the factory.