language
ChineseChinese
EnglishEnglish
RussianRussian
FrenchFrench
ItalianItalian
ArabicArabic
KoreanKorean
GermanGerman
JapaneseJapanese
+86 18952250768 Wei.li@tassin.com.cn
search

Products

Home > Products > Vulcanizing Process of Tire Rubber > Mold Edge Release Agent

Products

Hot news

Hot Products

Mold Edge Release Agent

Package:
500g bottle
Storage and valid period:
Prevent freezing and store in a cool, ventilated, and dry place.
Three months from the production date. Please refer to the storage advice and expiration date on the packaging.

Contact

Product details

Apply it to the sidewall of the tire's segment mold joint to make the mold joint smoother. During vulcanization, the rubber squeezed into the mold joint is easy to slide out, preventing the rubber from remaining in the mold joint and forming dirt. This can prevent the appearance defects of the next tire.

Mold Edge Release Agent

Product Specialties

1.Environmentally friendly water-based products, free of any solvents.

2.Using it on high-temperature molds will not create safety hazards and will not affect employee health.

Typical properties
ModelME-510
Appearance

Yellow white or gray white liquid

Density (water=1)1.0 ± 0.1 (g/cm) ³, At  25 ℃)
Application Methods
1. First application

After sandblasting and cleaning the mold, use an air duct to blow it clean. At this time, you can manually apply a cotton mask or gloves on the side wall of the mold seam. The best effect is when the mold temperature is 60 ℃. Apply the original solution.

2. Construction requirements

Apply it to the side wall of the mold gap, leaving a width of 2mm near the mold cavity. This is to prevent the coating from being squeezed out during mold closing, forming small protrusions at the mold gap, which can affect the appearance of the tire. If there is indeed a small amount of extrusion, use an art blade to repair it. After the coating dries, it can be installed and used.

3. Painting cycle

Generally, applying it once can keep the mold gaps clean for ten days. This way, we can reapply it every eight days, so that production can continue. For the second and subsequent application, it needs to be mixed with water in a ratio of 1:1-2.

You might like……

Please feel free to contact us for any inquiries or customization requests regarding rubber tire additives. Our team is dedicated to providing you with professional and efficient service.

Related Products

Rubber Anti-tack Agent TG-801
Rubber Anti-tack agent TG-8050
Rubber Anti-tack agent TG-8027
Rubber Anti-tack agent TG-8026
Tire Outside Paints
Tire Color Ribbon CR-100
Tire Mold Release Agent TM-7
Tire Mold Release Agent TM-201
Dynamic Balance Counterweight
Black Inside Tire Paints V921-B
Tire Protective Paint
Hyper-Dispersible Silica
Water-based Cleaning Agent
Mold Heat Insulation Painting BW-1
Mold Protective Agent MB-610
Highly Dispesible Active Zinc Oxide
Bladder Crystal Plating DJ-601
Curing Bladder Coating BC-501
Rubber Odor Absorber
Mold Edge Release Agent
< >

Contact

  • Phone: +86 18952250768
  • Fax: 0086 051688450108
  • E-mail: Wei.li@tassin.com.cn
  • Address:No.1, Ningjiang Industrial Park, Suining County, Xuzhou City, Jiangsu Province, China
Custom Service Resources Support
Tassin New Material Technology Xuzhou Co., Ltd TASSIN   All Rights Reserved   2023
Tassin New Material Technology Xuzhou Co., Ltd
All rights reserved.
TASSIN All Rights Reserved 2023
email whatsapp skype